GTAC Observation Log 1. Date : 26/10/2013 2. Observation Sr. No. : 6750 3. Observer : Ruta Kale,Julius MaxFerdinand Donnert,Tiziana Venturi,Daniele Dallacasa,Rossella Cassano,Gianfranco Brunetti 4. Observer's Email : rkale@ira.inaf.it,donnert@ira.inaf.it,tventuri@ira.inaf.it,daniele.dallacasa@unibo.it,rcassano@ira.inaf.it,brunetti@ira.inaf.it 5. Project Name : Constraining physics of particle acceleration in merging galaxy clusters: the textbook case of `El Gordo' 6. Project Code : 25_023 7. Operator(s) : Deepak,Pramod, 8. Command File : /odisk/gtac/cmd/ruta/25_023/25_023_elgordo.cmd 9. LTA File : /gsbifrdata/26oct/25_023_26oct2013.lta, 10. LogFlag File : /odisk/online1/logflags/25_023.FLAGS.1, ANTENNA SETTINGS : 11. RF Band(MHz) & Solar Attn(dB)- RF1 : 306 MHz ,RF2 : 306 MHz, SA1 : 0 dB, SA2 : 0 dB 12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 255 MHz, ILO2 : 255 MHz , IVLO1 : 51 MHz, IVLO2 : 51 MHz 13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+12 dB, 32 MHz,ON, IF-CH2 : 4+12 dB, 32 MHz,ON GSB SETTINGS : 14. GSB Mode : Realtime 15. GSB LTA : 8 16. GSB CTRL : ONLINE 17. GSB Fstop : ON 18. GAIN EQ : ON 19. Stokes : TotIntensity 20. Beam - 1 : OFF 21. Beam - 2 : OFF 22. ACQ BW : 33.33 MHz 23. Final BW : 33.333333 MHz; Step # 0 24. Maximum Channels : 256 25. Channel Numbers : 0:255:1 26. LO5 -1 : 149.00 27. LO5 -2 : 156.00 28. Frequency Parameters (TPA) : 306 306 255 255 51 51. 29. Integration Time : 16.106112 Sec. 30. No of Antennas Working(Fringing) at the begining :30 31. Name of Non-Working Antennas (with reason for each) : 32. Note for Backup : 33. Start and End Time of Obs.(IST): 21:05 - 02:00 34. ONLINE Machine : Lenyadri 35. No of Antennas Working(Fringing) at the end :30 36. Comments (During Observations) : 21:05 : Started set up. 21:18 : Started scan on 3C48 for 15mins. 21:47 : Started scan on 0116-208 for 5mins. On short baselines phase is stable than on longer baselines, may be due to scintillation. 21:54 : to check phase on 0120-153, recorded data for 5mins. Still phase is unstable. 21:55 : Unstable phase and amplitude is due to Scintillation. Started command file with 0116-208 phase cal. 22:33 : scintillation is stopped. 01:19 : Stopped command file. 01:27 : Started scan on 3147. 02:00 : Stopped scan on 3C147 and observation session is over.