GTAC Observation Log 1. Date : 23/03/2021 2. Observation Sr. No. : 13013 3. Observer : Mayank Narang, Manoj Puravankara, C.H. IshwaraChandra 4. Observer\'s Email : mayankn1154@gmail.com, manoj.puravankara@tifr.res.in, ishwar@ncra.tifr.res.in 5. Project Name : uGMRT observations of GJ1151: the first plausible detection for radio emissions from an exoplanet 6. Project Code : 39_008 7. Operator(s) : Pramod, Sachin 8. Command File : /data1/gtac/cmd/39_008/b2/22mar.py 9. LTA File : /gsbifrdata1/22mar/39_008_22mar2021_gsb.lta, /gwbifrdata1/22mar/39_008_22mar2021_gwb.lta 10. LogFlag File : ANTENNA SETTINGS : 11. RF Band(MHz) & Solar Attn(dB)- RF1 : 156 MHz ,RF2 : 156 MHz, SA1 : 0 dB, SA2 : 0 dB 12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 218 MHz, ILO2 : 218MHz , IVLO1 : 62 MHz, IVLO2 : 62 MHz 13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,ON, IF-CH2 : 4+14 dB, 32 MHz,ON GSB SETTINGS : 14. GSB Host : gsbm1_shivneri 15. GSB Mode : Realtime 16. GSB LTA : 8 17. GSB CTRL : ONLINE/TGC 18. GSB Fstop : ON 19. GAIN EQ : ON 20. Stokes : Total_Intensity 21. Beam - 1 : OFF 22. Beam - 2 : OFF 23. ACQ BW : 16.666666 MHz 24. Final BW : 0 MHz; Step # 0 25. Maximum Channels : 256 26. Channel Numbers : 0:255:1 27. LO5 -1 : 138 28. LO5 -2 : 167 29. Frequency Parameters (TPA) : 156 156 218 218 62 62 30. Integration Time : 8.053 Sec 31. No of Antennas Working(Fringing) at the beginning :25 32. Name of Non-Working Antennas (with reason for each) : C03 : Mechanical Work. W03 : Servo problem (servo lmc disconnected) W06 : Low fringe C00 : 130 pol no fringe S01 : Feed not rotated. 33. Note for Backup : 34. Start and End Time of Obs.(IST): 22 Mar 2021 19:00:00 - 22 Mar 2021 23:05:00 35. ONLINE Machine : TGC 36. No of Antennas Working(Fringing) at the end :27 37. RFI Status : 38. Comments (During Observations) : ------------GWB Setting--------- GPU_MODE : Realtime GPU_LTA : 4 GPU_ACQ_BW : 200.0000 GPU_FINAL_BW : 200 GPU_EDGE_FRQ : 0 GPU_CHAN_MAX : 2048 GPU_CHAN_NUM : 0:2047:1 GPU_STOKES : Total_Intensity GPU_SIDEBAND : 1 1 GPU_RF4 : 300 300 GPU_DDCLO4 : 0.0000 0.0000 GPU_SB4 : 1 1 GCODE4 : 39_008 GPU_CNTRL : ONLINE/TGC GPU_FSTOP : ON GPU_BEAM_1 : OFF GPU_BEAM_2 : OFF GPU_BEAM_3 : OFF GPU_BEAM_4 : OFF GPU_BM_INT : 8 GPU_GAINEQ : ON GPU_TPA : From online/TGC tpa GPU_BITS : 8 Bits GPU_FILRFI : RFI Filterring OFF GPU_BEAM_S : OFF GPU_PFB : OFF GPU_PFB_TAPS : 16 GPU_BEAM_BIT : 16 GPU_VLT_BIT : 8 GPU_ENV : RELEASED -------------------------------- 18:45 : Started set up. 19:15 : Started scan on 3C147. 19:25 : Stopped scan and started command file. 20:10 : C00 130 pol and S01 started working. /data1/gtac/cmd/39_008/b2/22mar.py 23:05 : Stopped command file and observation session is over.