GTAC Observation Log

1. Date : 30/10/2021
2. Observation Sr. No. : 13605
3. Observer : Jayanta Roy, Paul Ray, Bhaswati Bhattacharyya, Ben Stappers, Jayaram Narayanan Chengalur, Sanjay S. Kudale, Tyrel J. Johnson, Matthew Kerr, Patrick Weltevrede, Paulo Cesar Freire
4. Observer\'s Email : jroy@ncra.tifr.res.in, paul.ray@nrl.navy.mil, bhaswati@ncra.tifr.res.in, Ben.Stappers@manchester.ac.uk, chengalur@ncra.tifr.res.in, ksanjay@gmrt.ncra.tifr.res.in, tyrel.j.johnson@gmail.com, matthew.kerr@gmail.com, Patrick.Weltevrede@manchester.ac.uk, pfreire@mpifr-bonn.mpg.de
5. Project Name : Long-term timing follow-up for the third transitional redback millisecond pulsar J1227-4853
6. Project Code : 41_081
7. Operator(s) : Deepak, Pramod
8. Command File :  /data1/gtac/cmd/jroy/41_095_29oct.py
9. LTA File : /gwbifrdata/30oct/41_081_30oct2021_gwb.lta
10. LogFlag File :  

ANTENNA SETTINGS :

11. RF Band(MHz) & Solar Attn(dB)- RF1 : 591 MHz ,RF2 : 591 MHz, SA1 : 0 dB, SA2 : 0 dB
12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 540 MHz, ILO2 : 540MHz , IVLO1 : 51 MHz, IVLO2 : 51 MHz 
13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,ON, IF-CH2 : 4+14 dB, 32 MHz,ON

GSB SETTINGS :

14. GSB Host : gsbm1_shivneri
15. GSB Mode : Realtime
16. GSB LTA : 8
17. GSB CTRL : ONLINE/TGC
18. GSB Fstop : ON
19. GAIN EQ : ON
20. Stokes : Total_Intensity
21. Beam - 1 : OFF
22. Beam - 2 : OFF
23. ACQ BW : 33.333333 MHz
24. Final BW : 0 MHz; Step # 0
25. Maximum Channels : 256
26. Channel Numbers : 0:255:1
27. LO5 -1  : 149
28. LO5 -2  : 156

29. Frequency Parameters (TPA) : 591 591 540 540 51 51
30. Integration Time : 4.0265 Sec
31. No of Antennas Working(Fringing) at the beginning :25

32. Name of Non-Working Antennas (with reason for each) :
C03 : Mechanical Work.
C10 : : 130 pol low fringe.
W04,W05 and W06 : OFC problem.

33. Note for Backup :

34. Start and End Time of Obs.(IST): 30 Oct 2021 10:00:00 - 30 Oct 2021 11:00:00

35. ONLINE Machine : TGC

36. No of Antennas Working(Fringing) at the end :25

37. RFI Status :

38. Comments (During Observations) :
GPU_PFB,0
GPU_PFB_TAPS,4
GPU_WALSH,0
GPU_CHAN_NUM,0:4095:1
GPU_BEAM_S,0
GPU_EDGE_FRQ,0
GPU_BEAM_3,2:1
GPU_BEAM_2,0:1
GPU_BEAM_1,3:1
GPU_BEAM_4,0:1
GPU_FINAL_BW,1
GPU_VLT_BIT,8
GPU_FSTOP,1
GPU_FILRFI,0
GPU_BM_INT,4
GPU_DDC,0
GPU_CNTRL,1
GPU_GAINEQ,1
GPU_LTA,8
GPU_CHAN_MAX,4096
GPU_ENV,1
GPU_HOSTS,2
GPU_MODE,0
GPU_STOKES,2
GPU_TPA,0
GPU_ACQ_BW,200.0000
GPU_BEAM_BIT,16
GPU_BEAM4_DATASERVER,gwbh10
GPU_BEAM1_DATASERVER,gwbh7
GPU_IFR_DATASERVER,gwbh6
GPU_BEAM2_DATASERVER,gwbh8
GPU_BEAM3_DATASERVER,gwbh9


# GWB GAC configuration is as follows : 
# BEAM-1:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=22
# BEAM-1:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23
# BEAM-2:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=22
# BEAM-2:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23
# BEAM-3:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=22
# BEAM-3:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23
# BEAM-4:130 :: C00 C01 C02 C04 C05 C06 C08 C09 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=22
# BEAM-4:175 :: C00 C01 C02 C04 C05 C06 C08 C09 C10 C11 C12 C13 C14 E02 E03 E04 S01 S02 S03 S04 W01 W02 W03 Total=23

10:00 : Started set up.
10:15 : Phasing and power equalized done.
10:18 : Started command file.
  /data1/gtac/cmd/jroy/41_095_29oct.py\'
11:00 : Stopped command file and observation session is over.