GTAC Observation Log 1. Date : 27/02/2011 2. Observation Sr. No. : 5266 3. Observer : Sandeep Sirothia,Ishwar Chandra, Nimisha 4. Observer's Email : sirothia@ncra.tifr.res.in,ishwar@ncra.tifr.res.in,ngk@ncra.tifr.res.in 5. Project Name : Extra Galactic Survey @ 150MHz using GMRT 6. Project Code : 19_043 7. Operator(s) : Deepak, Nilesh, Rupsingh, 8. Command File : /odisk/gtac/cmd/sirothia/loop1.cmd, /odisk/gtac/cmd/sirothia/loop2to5.cmd 9. LTA File : /rawdata/27feb/19_043_27feb2011.lta, /rawdata1/27feb/19_043_27feb2011.ltb, 10. GSB File : /gsbifrdata/27feb/19_043_27feb2011_gsb.lta 11. LogFlag File : /odisk/online1/logflags/19_043.FLAGS.77 ANTENNA SETTINGS : 12. RF Freq(MHz) & Solar Attn(dB)- RF1 : 156 MHz ,RF2 : 156 MHz, SA1 : 14 dB, SA2 : 14 dB 13. Ist LO (MHz) & IVth LO (MHz) : ILO1 : 218 MHz, ILO2 : 218 MHz, IVLO1 : 62 MHz, IVLO2 : 62 MHz 14. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 10+12 dB, 16 MHz,ON, IF-CH2 : 10+12 dB, 16 MHz,ON 15. BB BW(KHz) & BB ALC : 16000 KHz, ON CORRELATOR SETTINGS : GHB Settings : 16. GHB Channels : 0:127:1 17. Correlator Mode : UsbPolar 18. Frequency Parameters (TPA) : 156 156 218 218 62 62 GSB Settings : 19. Maximum Channels : 256 20. Final Bandwidth (MHz): OFF MHz; Step # 0 21. IFBW (MHz) : LO5 (KHz) : 16:138000-167000 22. Stokes : Full_Polar 23. Beam - 1 : OFF 24. Beam - 2 : OFF 25. Integration Time : 128 LTA ~ 16.908 Sec. 26. No of Antennas Working(Fringing) :25 27. Name of Non-Working Antennas (with reason for each) : C01 : Servo problem. C04 : BLDC Work. E04 : Servo problem. S02 : Painting. 28. Note for Backup :-- 29. Start and End Time of Obs.(IST): 17:20 - 07:00 30. ONLINE Machine : Lenyadri 31. Comments (During Observations) : 2s data files : /rawdata/27feb/19_043_27feb2011_2s.lta, /rawdata1/27feb/19_043_27feb2011_2s.ltb, /gsbifrdata1/27feb/19_043_27feb2011_gsb_2s.lta, -------------------------------------------------- 17:28 : Started scan on 3c48. 18:17 : S02 released for observation. 18:24 : Started scan on J0218+4232. 19:02 : Started command file. '/odisk/gtac/cmd/sirothia/loop1.cmd'. 21:10 : Started next command file. '/odisk/gtac/cmd/sirothia/loop2t05.cmd'. 06:45 : stopped the command file. 06:45 : scan started on 3c286. 07:00 : observation session over.