GTAC Observation Log

1. Date : 01/06/2015
2. Observation Sr. No. : 7815
3. Observer : Xinwen Shu, YOGESH CHANDOLA, Tinggui Wang, Ning Jiang, Di Li, Ningyu Tang
4. Observer's Email : xinwen.shu@cea.fr, yogesh.chandola@gmail.com, twang@ustc.edu.cn, jnac@mail.ustc.edu.cn, ithaca.li@gmail.com, nytang@nao.cas.cn
5. Project Name : The missing link: revealing the nature of radio emission from a supersoft intermediate-mass black hole with GMRT
6. Project Code : 28_039
7. Operator(s) : Deepak, Navnath, Pramod
8. Command File : /odisk/gtac/cmd/28_039/may31.cmd
9. LTA File : /gsbifrdata/31may/28_039_31may2015.lta
10. LogFlag File : /odisk/online1/logflags/28_039.FLAGS.2,/odisk/online1/logflags/28_039.FLAGS.1

ANTENNA SETTINGS :

11. RF Band(MHz) & Solar Attn(dB)- RF1 : 1371 MHz ,RF2 : 1371 MHz, SA1 : 0 dB, SA2 : 0 dB
12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 1320 MHz, ILO2 : 1320MHz , IVLO1 : 51 MHz, IVLO2 : 51 MHz 
13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,ON, IF-CH2 : 4+14 dB, 32 MHz,ON

GSB SETTINGS :

14. GSB Host : gsbm1
15. GSB Mode : Realtime
16. GSB LTA : 8
17. GSB CTRL : ONLINE
18. GSB Fstop : ON
19. GAIN EQ : ON
20. Stokes : Total_Intensity
21. Beam - 1 : OFF
22. Beam - 2 : OFF
23. ACQ BW : 33.333333 MHz
24. Final BW : 33.333333 MHz; Step # 
25. Maximum Channels : 512
26. Channel Numbers : 0:511:1
27. LO5 -1  : 149
28. LO5 -2  : 156

29. Frequency Parameters (TPA) : 1371 1371 1320 1320 51 51
30. Integration Time : 16.1061 Sec
31. No of Antennas Working(Fringing) at the beginning :28

32. Name of Non-Working Antennas (with reason for each) :
S04 : Taken for BLDC.
W05 : Taken for Mechanical work.

33. Note for Backup :

34. Start and End Time of Obs.(IST): 31 May 2015 15:00:00 - 01 Jun 2015 03:00:00

35. ONLINE Machine : Shivneri

36. No of Antennas Working(Fringing) at the end :28

37. Comments (During Observations) :
15:00 : Started set up.
15:11 : Started scan on 3C147.
15:43 : Stopped scan and started command file.
    '/odisk/gtac/cmd/28_039/may31.cmd'
16:40 : W05 started working.
17:00 : W03 servo problem.
02:22 : Started scan on 3C286.
03:00 : Observation session over.