GTAC Observation Log

1. Date : 08/05/2016
2. Observation Sr. No. : 8560
3. Observer : Natacha Laura Isequilla, Manuel Fernandez-Lopez, Santiago delPalacio, Paula Benaglia, C.H. IshwaraChandra, Nelida Mabel Gonzalez, Estrella GuzmánCColque, María Mercedes Vazzano
4. Observer's Email : draco16681@gmail.com, manferna@gmail.com, sdelpalacio@iar.unlp.edu.ar, pbenaglia@fcaglp.unlp.edu.ar, ishwar@ncra.tifr.res.in, ngonzalez@fcaglp.unlp.edu.ar, estreguzman@gmail.com, mvazzano@fcaglp.unlp.edu.ar
5. Project Name : Spatial Distribution and Variability of the Non-Thermal Emission Associated with Proplyd-like ObjectsNear theCygnus OB2 Region
6. Project Code : 30_046
7. Operator(s) : Navnath, Pramod
8. Command File : /odisk/gtac/cmd/30_046/obs.cmd
9. LTA File : /gsbifrdata1/08may/30_046_08may2016.lta
10. LogFlag File : /odisk/online1/logflags/30_046.FLAGS

ANTENNA SETTINGS :

11. RF Band(MHz) & Solar Attn(dB)- RF1 : 306 MHz ,RF2 : 306 MHz, SA1 : 0 dB, SA2 : 0 dB
12. Ist LO (MHz) & IVth LO (MHz): ILO1 : 255 MHz, ILO2 : 255MHz , IVLO1 : 51 MHz, IVLO2 : 51 MHz 
13. IF Attn(dB) , IF BW(MHz) & IF ALC : IF-CH1 : 4+14 dB, 32 MHz,ON, IF-CH2 : 4+14 dB, 32 MHz,ON

GSB SETTINGS :

14. GSB Host : gsbm1_shivneri
15. GSB Mode : Realtime
16. GSB LTA : 8
17. GSB CTRL : ONLINE
18. GSB Fstop : ON
19. GAIN EQ : ON
20. Stokes : Total_Intensity
21. Beam - 1 : OFF
22. Beam - 2 : OFF
23. ACQ BW : 33.333333 MHz
24. Final BW : 0 MHz; Step # 0
25. Maximum Channels : 512
26. Channel Numbers : 0:511:1
27. LO5 -1  : 149
28. LO5 -2  : 156

29. Frequency Parameters (TPA) : 306 306 255 255 51 51
30. Integration Time : 16.1061 Sec
31. No of Antennas Working(Fringing) at the beginning :27

32. Name of Non-Working Antennas (with reason for each) :
C01 : Taken for BLDC
E06 : Taken for CST painting
W04 : ABC time out

33. Note for Backup :

34. Start and End Time of Obs.(IST): 08 May 2016 05:00:00 - 08 May 2016 11:00:00

35. ONLINE Machine : Shivneri

36. No of Antennas Working(Fringing) at the end :27

37. Comments (During Observations) :
05:00 : Started set up.
05:10 : Started command file.

 '/odisk/gtac/cmd/30_046/obs.cmd'

08:20 : Started cmd scan on 3c48 for 15 min.
08:25 : W02 was ABC Time out. Taken for Painting work.
08:43 : restarted cmd file.
10:56 : Started scan on phase cal.
11:02 : Observation session over.
--------------------------------------------